eo_logo
  • Country/Region
  • cart   
 
See all 81 Products in Family

0.5° Diffusing Angle 2" x 2" Unmounted Sheet

Stock #47-990
₹16,044.00 Other Coating Options
×
Qty 1-5
₹16,044.00
Qty 6+
₹14,196.00
Volume Pricing
Request Quote
Angle Tolerance (°):
±0.5
Diffusing Angle (°):
0.5 (FWHM)
Damage Threshold, Pulsed:
0.22 J/cm2 @ 1064nm, 10ns (typical)
Dimensional Tolerance (mm):
±0.5
Dimensions (inches):
2 x 2
Dimensions (mm):
50.80 x 50.80
Operating Temperature (°C):
-30 to +100 (Maximum of 240 Hours)
Substrate: Many glass manufacturers offer the same material characteristics under different trade names. Learn More
Polycarbonate
Thickness (mm):
0.78
Transmission (%):
>85
Type:
Holographic Diffuser
Wavelength Range (nm):
400 - 1600
Width (mm):
50.80
Construction:
Unmounted

Regulatory Compliance

RoHS 2015:
Reach 209:

Product Family Description

  • Transmission Efficiency >85%
  • Elliptical and Circular Diffusing Outputs
  • Ideal for Visible and Near-Infrared Applications
  • UV Holographic Diffusers Also Available

Holographic Diffusers are used to control the diffuse area of illumination and increase transmission efficiency to greater than 90% from filament lamps, LEDs, arc lamps, and other sources. Standard ground glass and opal glass will produce diffuse illumination, but the diffuse light area will often exceed the requirements of the system. This over-illumination, associated with traditional diffusers, reduces efficiency and can often lead to added costs by requiring higher power illumination sources, lenses, and possibly filters. It is important to note that diffusing angles are given for a collimated input beam and angular divergence will vary for different incidence angles.

Unlike many holographic elements, these specific polycarbonate components can be used throughout the visible and near-infrared. Available individually, as umounted sheets, or in sets of four filters. Holographic Diffusers can be cleaned with a de-ionized water rinse, followed by a forced air drying. Wipe gently with lens tissue soaked with methanol, followed with a forced clean air or nitrogen drying. Holographic Diffusers are resistant to methanol and methylene chloride.

Note: Matte surface should face the light source. To clean holographic diffusers, dampen a lint free cloth wipe with methanol and gently wipe the entire diffuser surface in a gentle, circular pattern. Immediately and carefully blow off the clean diffuser area with dry compressed air. Caution: cleaning may cause a change in the optical performance of the diffuser.

Title  Type Compare Stock Number  Price Buy
2"/50.8mm Square, Bar Clamp, Quick Start Optical Mounts Fixed #17-529 ₹11,214.00 Request Quote
  • Contact Us
    ×
40mm Sq., Fixed Filter Holder Fixed #54-997 ₹6,468.00
Qty 10+ ₹5,838.00 Request Quote
  • 7 Days
    ×
60mm sq - Rectangular Bar Clamp Fixed #54-995 ₹8,736.00
Qty 10+ ₹7,875.00 Request Quote
  • 10 to 12 Days
    ×
 
Sales & Expert Advice
 
or view regional numbers
Easy-to-Use
QUOTE TOOL
enter stock numbers to begin
×